Standard horizontal split case pump
Technical:
Qmax: m3/hr max 3400
Hmax: 235 m
Temperature: up to 120°C; Higher on
request
Delivery Size: DN 50 - DN 400
Application:
Water supply / general industry / building service / fire fighting and spray irrigation / district heating
Feature:
Mounting: Vertical
Design:
Mounting: Inline horizontal
Stages: Single / double, single / double suction Impellers shaft with sleeves
Grease lubricated anti-friction bearing
Mechanical seal / gland packing
Engineered horizontal split case pump
Technical:
Qmax: Qmax: m3/hr max 18000
Hmax: 270 m
Temperature: up to 120°C; Higher on request
Delivery Size: DN 50 - DN 400
Application:
Water supply/ general industry / ports and docks / fire fighting and irrigation / marine desalination
Feature:
Mounting: Centre line / vertical, drive connection: direct / cardan shaft bush bearing, Staggered vane design for fan pump application and special suction/ delivery orientation* instrumentation & controls.
Design:
Mounting: Inline horizontal
Stages: One / two / three stage single/ double suction impellers
Grease / Oil lubricated antifriction bearings
Mechanical seal / gland packing
Multistage ring suction pump
Technical:
Qmax: Qmax: 1000 m3/hr
Hmax: 1800m
Temperature: up to 1600 C
Delivery Size: DN 32 - DN 250
Application:
Mine dewatering, descaling in steel mills, boiler feed application, reverse osmosis for desalination plants water supply / general industry and fire fighting.
Feature:
Mounting: Mounting: Centreline / vertical, multi-outlet design and balance valve design for axial thrust bush bearing / roller bearing
Design:
Mounting: Horizontal
Stages: 3 to 15
Radial flow impellers with vane diffusers mechanical seal/ gland packing
Grease lubricated antifriction bearings
Norm pump as per EN733
Technical:
Qmax: 600 m3 /hr
Hmax: 150 m
Temperature: up to 1200C
Delivery Size: DN 32 - DN 150
Application:
Building service / sprinkler systems / water supply / general industry
Design:
End suction top discharge
Mounting: Horizontal
Stage: Single
Back pullout design
Closed impeller
Mechanical seal/ gland packing
Grease lubricated antifriction bearings
End suction pump as per ISO 2858 - MISO / PISO
Technical:
Flow: upto 750 m3/hr
Head: upto 170 m
Temperature: -20ºC to 120ºC
Delivery Size: 32 - 200
Application:
HVAC systems / water transfer / distribution systems / fire fighting / cooling tower
Feature:
Bearing Housing - Unique design for grease & oil lubrication and provisions for temperature gauge / vibration probe. Bearings - NR type replaced with standard type.
Design:
Standards as per ISO 2858
End suction top discharge
Stage single
Back pullout design
Closed Impeller
Gland packing/Mechanical seal
Monoblock pumpset- 1 Phase - WMB / MPMS
Technical:
Flow: upto 750 LPM
Head: upto 30 m
Power: upto 2 HP
Voltage: 220 V
Application:
Water supply in - Apartments / Hotels / Irrigation / Clear water transfer in Industries
Feature:
Suitable for wide band of voltage i.e. 160V to 240V, lifelong permanent lubricated (ZZ) bearings, high performance TEFC, Class of insulation 'F’, built in thermal over-load protection, capacitor fixed inside the terminal box to avoid damage, dynamically balanced rotating parts to ensure min. vibration, noise free operation & long bearing life, sealing arrangement - Mech. Seal (High Quality for long life), designed for automatic air release during priming, direction of Rotation - ACW, when viewed from suction side, safety Feature - Earthing provision, TOP and low life cycle cost - low maintenance, low power consumption and easy motor rewinding
Sewage pump - STS/PDV/TC
Technical:
Flow: upto 1500 LPM
Head: upto 32 m
Solid passage: upto 35 mm
Application:
Sewage disposal from residential buildings / commercial buildings / industry / small hospitals
Feature:
Attached float switch (A-model) enables easy operation, robust pump with high efficiency, dry motor construction with sealing chamber, stainless steel motor body with IP 68 protection, AC thermal motor protection, integrated motor control for current overload and high temperature and asy to carry and handle.
